Medium Flush Wood NexGen-Fyre™ Rect.

• Emissions: 2.4 Grams Per Hour (CORD WOOD)
• Heating Capacity:* 1,200 to 2,000 Square Feet
• EPA Tested BTUs: 15,583 to 55,395 BTU’s Per Hour
• “Real World BTUs”:** See Below
• Maximum Burn Time: Up to 10 Hours
• Firebox Size: 2.2 Cubic Feet
• Maximum Log Size: 24”
• Weight: 450 Pounds
• Construction: 5/16” to 1/4” Steel Plate
• LHV Overall Efficiency:*** Up to 78%
• HHV Overall Efficiency:*** Up to 72%
• Glass Viewing Area: 22-5/8” W x 10-1/8” H, 226.6 Sq. In.
  * Heating capacity may vary depending on degree of home insulation, floor plan and ambient temperature zone
  of the area you live.
  ** EPA tests to determine BTU output are achieved with a single load of wood at each burn rate. At home, you are likely
  to add more wood to your insert to maintain your desired comfort level. By the simple process of loading your fireplace
  insert with additional wood, you could achieve up to a 20% higher heat output than established during EPA testing.
  *** Overall efficiency as tested using B-415.1 using Cord Wood. LHV = Low Heat Value, HHV = High Heat Value.

Installation Drawings

Dimension Drawing

Documents

• Single Page Flyer
• Brochure 
• Owner’s Manual
• Cheat Sheet
• Flush Wood Plus Firebrick Order Form
• Flush Wood Plus Metropolitan, Univ Face Install Instructions
• One-Piece Panel Trim Instructions
• GreenStart Igniter
• GreenStart Replacement Parts List
• Instructions – High Temperature Wood Insert Wiring Kit
• Vent Kit Instructions – Wood Masonry Chimney Reline Kit
• Vent Kit Instructions – Wood ZC Chimney Reline Kit
• Wood Insert Flue Adapter Instructions – Stainless Steel 4 to 7 Inch Offset
• Fireplace Insert Installation Worksheet